Excel ReStackor demo

Windows, Windows XP, Windows Vista , OpenOffice

MicroSoft Excel ReStackor Demo:

There are three steps to install the ReStackor demo:

Download the zip file for Microsoft Excel.
Open the zip file and copy the ReStackor folder to the C drive.
- Note: ReStackor and the embedded excel macros are hard coded to operate on the C:\ReStackor path. The spreadsheets in C:\ReStackor\Excel can be copied, moved and run from any directory but the ReStackor code must be located on the C:\ReStackor\Code\restackor.exe path. ReStackor will automagically be on that path if you simply copy the unzipped ReStackor folder to the C drive.
Copy the excel file C:\ReStackor\Excel\ReStackor.xls to some other directory like C:\My Calcs\ReStackor
- Open c:\My Calcs\ReStackor\ReStackor.xls and you are ready to rock!

Problems Running Demo ?

Windows Vista: Instructions for launching ReStackor spreadsheets under Windows Vista are here .
Europe: If you are running ReStackor in Europe you are going to have to deal with the dorky dot/comma decimal separators used here in the US. Instructions to switch your spreadsheets to use dots for decimals are here.
Common Setup Problems: Some common problems installing the demo are detailed here .

Demo Code Limitations:

The demo runs the full featured ReStackor pro version of the software. ReStackor pro includes all the shim stack force balance and stack stiffness calculations of Shim ReStackor. ReStackor pro adds the capability to compute fluid dynamic flow losses and forces through the suspension flow circuits.

In demo mode the software will not allow valve diameter greater than 11mm, shim diameters greater than 10 mm or stacks with more then ten shims.

Unlocking the Demo:

To unlock ReStackor from the demo mode you need to purchase a code key from paypal. Paypal code keys are available for Shim ReStackor and ReStackor pro. Instructions on purchasing a code key are here.